do-it-yourself fence from the chain-link photo instruction

To create additional comfort in suburban housing and clearly define the boundaries of your territory, you need to build a fence. Naturally, we all strive to get an excellent result at the lowest cost, and the construction of fences, as you know, is quite an expensive business. However, there is also an option for saving money. We bring to your attention the creation of a fence in the form of a metal chain-link fence. It can be used both in the private sector, fencing off from neighbors, and on a summer cottage plot. Its main advantages are the speed of construction and economic profitability..

Chain-link fenceDo-it-yourself fence from a chain-link mesh

If you need to protect a summer cottage with your own hands, then you should not even look for a better option. The mesh perfectly transmits the rays of the sun and does not give shade to the plants; in addition, it can be decorated with plants that weave. For example, if you plant clematis along the entire fence, then the very next season you will have a magnificent green fence on your site, and besides, you will also have plants decorated with flowers that bloom throughout the spring-autumn season..

What is a chain-link meshWhat is a chain-link mesh

What is a chain-link mesh

Building material, metal type. Quite durable and relatively cheap material in relation to its close relatives such as wood or corrugated board. It is also worth noting its availability, because you can buy a mesh in every specialized store of building materials. The form of the mesh is rolled. Due to this, its delivery to the site will not be difficult. It fits perfectly into the trunk of even the smallest car, and if you have a trailer, it is generally excellent..

To erect such a fence, you do not need to resort to the services of construction crews. Even a teenager can cope with this matter. By the method of constructing fences from this material, two types can be distinguished:

  1. Sectional erection.
  2. And erection by the method of tension.

Due to the fact that we are interested in the most economical option for creating a fence, we will present to your attention the second method – tension.

Sectional erection of a fence from a mesh of rowanSectional erection of a fence from a mesh of rowan

Required materials for the fence

To make a fence you will need the following building materials:

  1. Main material – mesh netting.
  2. Fastening posts – they can be made of wood, metal or concrete.
  3. Clamping material – reinforcement, clamps or cable.
  4. Welding machine – if you have it, many problems will be quickly solved.

Diagram of the construction of a fence made of rowan

With what materials are needed, everything is clear. Now you need to determine how much they should be purchased. Initially, we determine the perimeter along which the fence will be located. To do this, you need to take a few pegs, depending on the number of corners, and drive them into the transition points. Then, from peg to peg, pull a strong thread or wire and measure the length along it.

The next step is to decide how many pillars you need. Their approximate location from each other will be at a distance of no more than two and a half meters, but not less than two meters. How to find out the number of posts? It’s very simple, you need to take the length of the future fence already known to us and confidently divide it by the distance between the posts, as a result, you will find out their exact number.

It remains to determine how much of the grid is needed.

It remains to determine how much of the grid is needed. That’s why we needed a stretched cord. Having measured the cord, we get the length in running meters of the mesh.

Choice of materials

The next preparatory step will be to select the required materials. First of all, pillars – they can be wooden or metal. Here the choice depends only on you. If the pillars are made of wood, then their service life will be significantly reduced in relation to metal pillars, but the cost of the material will be lower.

Tension construction of a fence from a chain-link

Do not rush to go to the store for material for poles, maybe you recently had a construction, and there were pieces of metal or wood somewhere, they can be used for such purposes. Or, alternatively, you can buy from your neighbors, suddenly they have something unnecessary left. By the way, remember that the main material is mesh, it is quite light, which means that you should not make too powerful pillars..

Wooden poles:

If your posts are made of wood, then it is imperative to strip it and remove the remnants of the bark, the length of the posts should be determined in accordance with the height of the fence and the width of the main material.

To make it easier for you to navigate, you can determine the required height of the post using the following formula: width of the base material + 10 centimeters for the free distance between the ground and the fence +1 meter for the part that is underground. As a result, you will have the required column height.

Those pillars that are located in the corners are best made slightly longer than the intermediate ones. About 25 centimeters, this is necessary in order for the corner posts to dig deeper, they play the role of the main holders.

The part of the pillars, which is located in the ground, must be treated with a solution that protects the tree from rotting and destruction. The main part should be painted in the desired color for greater protection from external influences.

Metal pillars:

Metal is naturally stronger and more durable than wood. For pillars, you can take pipes, both round and square. If you go to the store for material, then you may be offered poles that are already ready for installation. They will be painted and also have special hooks.

Do-it-yourself mesh fence

By making such an acquisition, you spend a little more in terms of finances, but significantly save your time and effort. An excellent idea may be to purchase poles at a metal reception point, where their cost is several times cheaper, and the material may come across completely new, it just did not fit someone in terms of technical characteristics.

Choosing a grid:

It does not matter what shape the cells of the grid will be, whether they are square or in the form of a rhombus, their size is important. The choice of cell dimensions also depends on your priorities, perhaps at the dacha you are engaged in breeding poultry, in which case the dimensions should be small, because a chicken can easily crawl into a large hole or get entangled in it and die.

The material from which the mesh is made is wire, it can be black or galvanized. Some manufacturers took care of their product and carried out anti-corrosion treatment, but it happens that they do without it. This fact must be taken into account and clarified with the seller. For a more durable operation of your fence, it is better to take the mesh that is galvanized and painted. If the mesh is of high quality, then it will serve you faithfully for more than 20 years, and besides, it will have a more aesthetic appearance..

Pole installation process

The pillars are dug into the ground, and for this it is necessary to make a hole. You can dig them both with a drill and with a shovel. The bottom of the pit needs to be strengthened, sand and crushed stone are suitable for this, if there is no crushed stone, then pieces of stone can be its alternative. All this must be well compressed.

Next, we place a post in the pit and sprinkle it with earth, constantly tamping it. For shrinkage and greater density, the hole covered with earth must be filled with water. If the shrinkage was strong, then it is necessary to fill up with earth until the pit is level with the ground..

How to install a chain-link fence in the country with your own

If your pillars are made of metal, then they will have to be concreted. This will give stability to the posts, and they will stand for a long time without a hint of deflection or loosening. It is necessary to make the most ordinary concrete solution and pour it into the prepared hole. You need to start with the corner posts, and then the intermediate supports. Make sure that the height of the posts is the same everywhere. If a donkey is deeper, then slightly lift it up. And accordingly, if any pillar is higher, it must be lowered down with tapping movements. Also check the installation of the posts so that they are not distorted..

Tensioning the main mesh material

After all the supports have been installed, aligned with the cord, and the concrete has dried, you can begin to stretch the main material – the mesh netting. The net in a roll, without unrolling it, must be placed near one of the corner posts and securely fastened. If you chose a mesh that was not covered with corrosion solutions, then it should be pulled at a low height from the ground. 10 centimeters will be enough. Otherwise, your material will become unusable within a year..

The mesh is attached to the metal posts with hooks, which are welded on them in advance.The mesh is attached to the metal posts with hooks, which are welded on them in advance.

In the case of using wooden supports, it is necessary to fix the mesh with nails or staples. The mesh is attached to the metal posts with hooks, which are welded on them in advance..

In general, there are quite a few ways to attach the mesh: you can take a clamp or even do with the most ordinary wire and tie the mesh to the post. But depending on the method, the quality of the fastening may also suffer, and the main material must be fixed securely, so it is best to use proven fasteners. When the net is fixed on the first support, we unwind the roll and move to the second post. We do the same manipulations there..

In general, there are quite a few ways of attaching the mesh: you can take a clamp or even do with the most ordinary wire and tie the mesh to the post

To prevent the material from sagging, it is necessary to fasten and stretch the mesh with some tension, so that the mesh is well stretched, you can use a steel cable or reinforcement passed through the mesh cells. Can be performed both from above and below, or immediately both here and there.

Do-it-yourself fence from a chain-link mesh video

Docking rolls:

Sooner or later, but all good things come to an end, so a roll of material can come to its end and you will need to dock the end of one and the beginning of the other. For this purpose, the rolls are provided with connecting elements. Everything is elementary, just screw the end of one roll into the beginning of another.

Continue the whole process until the entire fence is covered with mesh. As you can see, everything is quite simple and not expensive..

Also check out our heading on the website: building tips